The seat-belts came without the hardware. I went to Home Depot and got what I need. The pipe is a 3/4 " x 3.5". I wanted something close to a 20mm ID to weld on the B pillars.
Removed the threaded parts and cut it in half.
After grinding, the nut is ready to be tacked.
Here is the spot where I want to weld it. I wanted to make sure that the anchor is very solid. In case of accident, the human body can take several G's and I want this to withstand the force.
Ready to be welded on the B pillars.
No comments:
Post a Comment